Operating Principle: Vibration is induced by the independent rotation of two separate offset weight rollers which are concentrically mounted one inside of the other (roller inside a roller design). The smaller (inner) of the two rollers is driven by a vane type motor. The vane, driven by compressed air or another inert gas, causes the roller to revolve around a raceway within the malleable iron cylindrical body. The rotation of the inner roller causes the larger (outer) roller to rotate multiple times as it revolves around the vibrator's body. The Speed or Frequency, measured as vibration-per-minute (VPM), of the inner roller is > 40% faster than the Speed/VPM of the outer roller. The combination of the VPM of the inner and outer roller produces significantly higher VPM when compared to single roller vibrators. The smaller the rollers, the higher the VPM at the same PSI air pressure. The number of revolutions (RPM) of the rollers is adjustable using an air regulator to adjust PSI. Higher PSI causes higher RPM. The Centrifugal Force Pounds (lbf) developed is increased based on the weight of the two rollers and the number of revolutions which results in an exponential increase of the centrifugal force produced. Dual Roller Vibrators can produce up to 14,600 VPM and up to 14,250 lbf. HD Single Roller Vibrators can product up to 10,000 VPM and up to 9,600 lbf.

Sizing Guide: Roller Vibrators, when used to prompt material flow, are sized based on the weight and characteristics of the material in the sloped portion of the bin, hopper or other vessel. Generally, for consistent, long term results, select a Roller Vibrator that at 80 PSI (can be run @ 30 to 90 PSI) produces 1-lbf for every 10-lbs of stored material. Have a different need for applied vibration? Our Application Engineers will be happy to help you select and correctly mount the right air or electric vibrator for any application where applied vibration can energize product movement. We'll let you trial it and guarantee the results – let us help!

Uses: Used extensively for compacting precast concrete, refractory materials and similar materials poured in form or mold applications. Apply to large hoppers, bins, railcars, chutes, molds, screens, and tables to keep materials flowing as they should.

Notes: Available in CL lug mount for quick change applications and in a foot-mount design for permanent mount applications. These simple, long-lasting vibrators provide very effective, high-frequency vibration at an economical price. Instant start and 60 PSI (can be reduced when operating); No lubrication; Inexpensive; Low maintenance; Moderate to high noise; Run vertical or horizontal.

1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

Make

Model

UNBAL

VPM @ 80 PSI

CF @ 80 PSI

CFM @ 80 PSI

N/A Martin N/A CCR-4400 N/A 0.441 lb.in5.1 kg.mm N/A 15000 vpm N/A 2816 lb1277 kg N/A 73 cfm2067 L/min
N/A Martin N/A CCR-5500 N/A 1.262 lb.in14.5 kg.mm N/A 14000 vpm N/A 7020 lb3184 kg N/A 58 cfm1643 L/min
N/A Martin N/A CCR-6500 N/A 2.344 lb.in27 kg.mm N/A 12500 vpm N/A 10395 lb4716 kg N/A 50 cfm1416 L/min
N/A Martin N/A DVR-5500 N/A 1.262 lb.in14.5 kg.mm N/A 14000 vpm N/A 7020 lb3184 kg N/A 58 cfm1643 L/min
N/A Martin N/A DVR-6500 N/A 2.344 lb.in27 kg.mm N/A 12500 vpm N/A 10395 lb4716 kg N/A 50 cfm1416 L/min
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 
Copyright © 2017 Airmatic Inc.,  All Rights Reserved