The MARTIN® Dust Curtain is installed near end of transfer point chute enclosure at the exit of the loading zone and slows loading zone airflow so airborne dust can settles back into the belt cargo. It provides effective sealing to prevent the escape of airborne fines. Mountd in the skirtboard cover, the dust curtains help create a plenum for dust suppression and dust collection.

Features

• Recommended Installation: One (1) Dust Curtain without slits closest to loading zone, followed by one dust curtain with slits at exit of skirtboard. Additional Dust Curtains may be installed to reduce air movement and isolate dust suppression or dust collection systems for additional dust control.
• Curtains form a plenum that slows air velocity, allowing airborne particles to return to belt.
• Slit curtains conform to belt load without pushing material off of the conveyor.
• Curtains hang to 1" below normal material profile on belt.
• Curtain bolts into steel frame for simple replacement.
• Rugged 1/4" rubber construction provides extended service in tough conditions.

NB: Skirtboard Cover is not supplied. Curtains are to be trimmed in field to fit conveyor troughing angle and skirtboard height. Recommended trim length is 1" lower than fully loaded material profile on belt.