The Model BA Conveyor Belt Alignment Control protects valuable conveyor belts from severe damage due to belt misalignment or run-off. The Model BA makes  sure that the belts are tracking properly — prevents costly down time and unnecessary maintenance expense. Designed especially for bulk handling  conveyor applications, it maintains a safeguard over equipment and keeps conveyor belts running.

Sometimes called a “side slip switch” or a “belt misalignment switch,” the Model BA operates on a very simple principal. Two controls are positioned close to the belt, one on each side, so that undesirable side to side motion of the belt will contact a switch roller. The roller “gives” just enough to actuate the switch. The signal generated by the actuated switch can be used to take appropriate action to re-align the conveyor belt, thus eliminating conveyor damage and serious down time.

1 - 4 of 4 | Results Per Page | View |
1 

Item #

Item Name

Ambient Temperature

Chassis Material

Enclosure Material

Enclosure Rating

Switch Type

Electrical Connection

BA-1 N/A Model BA Belt Alignment Control; 1 SP/DT Switch N/A -25°F to 160°F N/A Powder Coated Steel N/A Cast Aluminum N/A NEMA Type 1, 3, 4, 13 N/A 1 SP/DT N/A 1/2" - 14 NPT
BA-2 N/A Model BA Belt Alignment Control; 1 DP/DT Switch N/A -25°F to 160°F N/A Powder Coated Steel N/A Cast Aluminum N/A NEMA Type 1, 3, 4, 13 N/A 1 DP/DT N/A 1/2" NPT
BA-1X N/A Model BA Explosion-Proof Belt Alignment Control; 1 SP/DT Switch N/A -40°F to 160°F N/A Powder Coated Steel N/A Cast Aluminum N/A NEMA Type 7: Class I, Groups C, D; Type 9: Class II, Groups E, F, G N/A 1 SP/DT N/A 1/2" - 14 NPT
BA-2X N/A Model BA Explosion-Proof Belt Alignment Control; 1 DP/DT Switch N/A -40°F to 160°F N/A Powder Coated Steel N/A Cast Aluminum N/A NEMA Type 7: Class I, Groups C, D; Type 9: Class II, Groups E, F, G N/A 1 DP/DT N/A 1/2" NPT
1 - 4 of 4 | Results Per Page | View |
1 
Copyright © 2017 Airmatic Inc.,  All Rights Reserved