Shaft
- 17mm diameter - precision ground to assure proper bearing fit
- Milled slots in roll-shaft lock frame and roll, together forming a rigid assembly
- 17mm precision ground ball bearing
- Cartridge type seal
- 2170 Series
- Offset center roller
- 2º tilt in the direction of belt travel is built into frame to assist belt training
- 2200 Series
- Inline
- 3 mounting holes per side
- Thick cross angle increases strength and reduces vibration and fatigue
- 2170 Series
- Sealed
- Regreasable
- 2200 Series
- Sealed
Item # |
Belt Width |
Roll Diameter |
A |
G |
Weight |
CEMA Service |
|---|---|---|---|---|---|---|
| 205-18-45-0200 | N/A 18 in | N/A 5 in | N/A 27 in | N/A 22 3/4 in | N/A 75 lb | N/A B (Light Duty; Adj. Load 1 - 400 lbs.) |
| 205-20-45-0200 | N/A 20 in | N/A 5 in | N/A 29 in | N/A 24 3/4 in | N/A 78 lb | N/A B (Light Duty; Adj. Load 1 - 400 lbs.) |
| 205-24-45-0200 | N/A 24 in | N/A 5 in | N/A 33 in | N/A 28 3/4 in | N/A 84 lb | N/A B (Light Duty; Adj. Load 1 - 400 lbs.) |
| 205-30-45-0200 | N/A 30 in | N/A 5 in | N/A 39 in | N/A 34 3/4 in | N/A 95 lb | N/A B (Light Duty; Adj. Load 1 - 400 lbs.) |
| 205-36-45-0200 | N/A 36 in | N/A 5 in | N/A 45 in | N/A 40 3/4 in | N/A 105 lb | N/A B (Light Duty; Adj. Load 1 - 400 lbs.) |
| 205-42-45-0200 | N/A 42 in | N/A 5 in | N/A 51 in | N/A 46 3/4 in | N/A 118 lb | N/A B (Light Duty; Adj. Load 1 - 400 lbs.) |
| 205-48-45-0200 | N/A 48 in | N/A 5 in | N/A 57 in | N/A 52 3/4 in | N/A 130 lb | N/A B (Light Duty; Adj. Load 1 - 400 lbs.) |
