The GO-E2 is an electric-powered Gate Opener with a rotating platform (for a full 360º swivel) on a rolling carriage (to mount to secured-to-ground W-beam), utilizing pendant controlled, instant Forward-Reverse action, and a telescoping drive shaft with both vertical and horizontal adjustment (to follow traveling gate; accommodate varied height capstant). The GO-E2 is well suited for worksites that experience: (1) Railcars that vary from easy to moderately-difficult to open range because they are well maintained and regularly repaired; (2) railcars with either fixed position or traveling gate mechanisms; (3) limited compressed air supply; (4) railcars with varied height capstan/gate mechanisms; (5) rough or uneven trackside terrain making opener manueverability an issue. The GO-E2 uses a 5-HP motor to generate a constant speed of 34-RPM and a power output of 2,000 ft-lbs during surge and 875 ft-lbs during operation.

GO-E2 Gate Opener Features:
  • ROTATING PLATFORM ON ROLLING CARRIAGE
    180º pivot enables opening hopper car gates on parallel tracks, and a 90º pivot enables safe, out-of-the-way drive shaft protection when not in use. The Rolling Carriage locates and locks-down the Opener directly opposite every gate, anywhere along the unloading site.

  • HEAVY-DUTY TELESCOPING DRIVE SHAFT (TDS)
    Telescopes 40" to 82" (longer lengths available) and angles 50º vertical and horizontal to accommodate both traveling gate mechanisms and varied height capstans.

  • CAPSTAN DRIVE FITTING
    Precision machined, 4140 tool steel, 1-piece step-tapered drive tip 1-1/4" x 1-1/2" sq shank using HD set-screw retainer will last through hundreds of gate openings.

  • PENDANT CONTROL MOTOR STARTER
    Pushbutton control up to 20' from railcar gate enables instantaneous forward/reverse jog of gear motor to rock-open even stubborn gates.

  • 1-WORKER POSITIONING & OPERATION
    Enables greater productivity and reduced man-power planning.

  • EASY-LIFE, MANUAL HEIGHT ADJUSTMENT
    Easily compensates for differing height gates, or variations in unloading site docks or platforms.

  • INVERTER 5-HP MOTOR
    Provides low noise, low maintenance, and high durability. Manufactured to AGMA Class 3 Standards and allows 275% momentary overload capacity.

  • ECONOMICAL TO PURCHASE
    Meets even the tightest budget when an electric powered Gate Opener is required.

  • OPERATES AT 66DBA
    Accommodates noise restrictions at plant and unloading site operations.
Unit of Measure

Specifications

Model

N/A GO-E2 Beam Mounted Gate Opener with Telescoping Driveshaft (TDS)

Power

N/A 230 / 460VAC / 3PH / 60Hz

Working Torque

N/A 2,000 ft-lbs

Frame Dimensions

N/A Motor: 24"W x 26"L x 13"H; TDS: 40" compressed to 82" extended

Height Adjustment

N/A TDS Lift-On to accommodate any capstan height

Finish Coating

N/A Acrylic Enamel over Polyurethane

Included

N/A (1) Capstan Drive Fitting and (1) Manual

Gate Opener Weight

N/A Motor: 150 Lbs; TDS: 68 Lbs; Control Pkg: 21 Lbs

Shipping Weight

N/A 290 lb
Copyright © 2017 Airmatic Inc.,  All Rights Reserved