Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency "RubberHeadTM" vibrator head not only meets DOT non-metal head specifications for protecting coated rebar and expensive forms, but exhibit some very special and unique properties. The High Efficiency "RubberHeadTM" urethane dimpled construction sends strong shock waves off the entire length of the head, with a larger radius of action, producing denser concrete with less voids to patch.
Unit of Measure



N/A HSR 275 OZ


N/A 12000 vpm

Centrifugal Force

N/A 1100 lb


N/A Rubber

Vibration Width

N/A 22 in


N/A Short

Vibrator Head Dia

N/A 2.75 in

Vibrator Head Length

N/A 6 in
Copyright © 2017 Airmatic Inc.,  All Rights Reserved