This pneumatic Pocket Vibrator Assembly is a direct impacting piston/linear type vibrator that pounds the wall of the hopper car like a fast acting sledge hammer to break the material-to-wall bond, and then keep many materials stimulated to maintain constant flow. It fits all standard hopper car brackets, and the wedge's top lugs keep the RAIL-SHAKER™ Vibrator from becoming jammed in the pocket. The RAIL-SHAKER™ generates 2,200-VPM and 1,025 force-lbs at 80-PSI.

RAIL-SHAKER™ VIBRATOR BENEFITS
  • IMPROVE UNLOADING EFFICIENCY
    Unpainted, precision-machined, wide base for a flat mount and maximum vibration transfer, reduces unloading time by as much as 30%.
  • SAVE ENERGY
    Low pressure (PSI) plus low air consumptions (CFM) equal efficient operation. Uses less air than rotary vibrators with comparable force.
  • IMPROVE SAFETY
    Eliminate hazards associated with climbing around railcars and manually scraping interior walls.
  • HEAVY-DUTY CONSTRUCTION
    Rugged ductile iron body for improved strength-to-weight ratio, and heavy-duty gasket for lifetime positive sealing.
  • MINIMAL MAINTENANCE
    Limited maintenance required over life of Vibrator when used with filtered, lubricated air.
  • SMOOTH OPERATION
    Accurately ground and polished alloy steel piston for smooth operation.

Model

N/A RAIL-SHAKER™ Piston Vibrator Assembly

Frequency at 40 psi (2.76 bar)

N/A 1850 vpm

Frequency at 60 psi (4.14 bar)

N/A 2000 vpm

Frequency at 80 psi (5.51 bar)

N/A 2200 vpm

Air Consumption at 40 PSI

N/A 9.1 cfm

Air Consumption at 60 PSI

N/A 17.0 cfm

Air Consumption at 80 PSI

N/A 21 cfm
Copyright © 2017 Airmatic Inc.,  All Rights Reserved