CV Series
CV Series Vibrators incorporate two bolt-holes for perma nent mounting on hoppers, bins, or chutes Also available for DC electric power.
Two-bolt mounting provides permanent mounting for hoppers, bins or chutes.

  • High-Grade Ductile Iron Case provides maximum durability.
  • Low-Maintenance Bearings require lubrication after 500 hours of service.
  • Integral Clamp Foot on CCV Series provides portability and positive mounting.
  • Powerful, Efficient Motor for long service life, minimal power consumption.
  • Adjustable Eccentrics allow tuning of force output of most models to match application.

Rule-of-thumb vibrator sizing
One pound of vibrator force for every ten pounds of bin content. Mount vibrator as close as possible to material outlet. Reinforce mount area to prevent flexure of bin wall at mount location. Force output data derived from vibrator mounted to 10,000 pound (4530 kg) test block. Frequency and force will decrease on less rigid block.
Unit of Measure

Specifications

Make

N/A Martin

Model

N/A CV2.8-5HB

Min. Force Output

N/A 910 lb4048 N

Max. Force Output

N/A 4715 lb20973 N

Dimensions

A

N/A 9.87 in251 mm

B

N/A 6.87 in174 mm

C

N/A 9.81 in249 mm

D

N/A 8 in203 mm

E

N/A 3 in76 mm

F

N/A 3.44 in86 mm

G

N/A 0.875 in22 mm

H

N/A 0.75 in19 mm

J

N/A 0.5 in13 mm

Features

Features

N/A Force to Fit Application
Adjustable eccentrics on many models tune output to your needs.

Powerful, Efficient Motors
Long service in challenging applications with minimal power consumption.

Positive Frequency Control
Stepless adjustment allows precise regulation of material flow.
Copyright © 2017 Airmatic Inc.,  All Rights Reserved