Request Information
Belt Widths: 18" to 96"
Max Belt Speed: 1000 FPM
Mainframe Options: Paint
Blade Options: 3 Types

The QC™ #2 Secondary Cleaner combines a unique teardrop-shaped blade profile, and dual linear Spring Tensioners for effective cleaning performance at an economical price. This is the first Secondary Cleaner with one-pin blade replacement. Individual 3" wide blades independently conform to the profile of the moving belt. Blade tips molded into the urethane base are available in tungsten carbide, stainless steel, or ceramic. The QC™ #2 includes two (2) #2 Spring Tensioners.
Unit of Measure

Dimensions

Belt Width

 N/A 24 in

Mainframe Length (A)

 N/A 54 in1372 mm

Dimension B

 N/A 22.50 in572 mm

Blade Width (C)

 N/A 21 in533 mm

Weight

 N/A 61.90 lb28.10 kg

Specifications

Max. Belt Speed

 N/A 1000 fpm5.10 m/s

Max. Service Constant Temperature

 N/A -20 to 160 ºF-29 to 71 ºC

Wear Life

 N/A 0.5 in13 mm

Urethane Color

 N/A Orange

Tensioner Type

 N/A MARTIN® QC™ #2 Spring Tensioner

Door Type

 N/A MARTIN® CYA™ Door

Blade Type

 N/A Tungsten Carbide

Benefits

N/A

  • Fast Return on Investment
    Integrated cleaner and tensioner system provides effective cleaning without a high price tag, providing a prompt payback.
  • Maintains Effective Cleaning
    Individual 3 inch (76 mm) wide blades independently conform to profile of moving belt.
  • Saves on Maintenance Expenses
    Tungsten carbide blade tips last a long time, reducing costs for service downtime, labor, and replacement parts.
  • Cuts Blade Service Costs
    Blade change is a fast and easy, one-pin procedure. Blades are preloaded onto a belt-width cartridge, so one worker can quickly replace blade.
  • Won't Damage Belt on Splice
    System absorbs splice shock to safeguard belt, splice, and cleaner. Linear relief is built into the spring tensioner; urethane blades absorb radial shock.

Notes

N/A

  • Ordering
    Blade coverage is belt width minus 3 inches (76 mm). To protect belt edges, first blade on each end of cleaner assembly does not have tungsten carbide tip.

  • Application
    Martin Engineering recommends that the MARTIN® QC™ #2 Secondary Belt Cleaning System be installed so the cleaning blade contacts the belt at a point 2 to 4 inches (51 to 102 mm) after the point where the belt leaves the head (discharge) pulley. If obstructions prevent installation at this point, or if additional cleaners are desired, the cleaner should be installed 2 to 4 inches (51 to 102 mm) past the point where the belt leaves the support idler.
    See your Martin Engineering representative for more infor mation, or visit www.martin-eng.com.

Copyright © 2017 Airmatic Inc.,  All Rights Reserved