The ELECTRO-LUBER MD™ 2000 TITAN II is a self-contained, microprocessor controlled, motor-driven automatic lubricator. The operation of the TITAN II Lubricator depends upon the use of minor internal spring pressure forcing lubricant into a temperature compensating, fixed displacement pump. This dispenses the lubricant at pressures up to 900 PSI. This pressure allows the TITAN II to be used with long feed pipework, and it can even cycle progressive distributors, allowing it to feed several bearings. When one or a combination of selector switches are turned on, the unit will activate at selected intervals. At each interval, approximately 0.05 oz of grease will be dispensed to the bearings. This grease output is not affected by temperature or altitude. When the unit is empty, refilling is accomplished using standard grease cartridges.
Unit of Measure

Dimensions

Height

N/A 17 3/4 in

Width

N/A 8 in

Diameter

N/A 7 3/16 in

Specifications

Capacity

N/A 14 fl oz
Temperature Range1 N/A -5° to 132 ºF

Application

N/A Multi-Point Single

Technology

N/A Mechanical fixed-displacement pump
Power2 N/A up to 900 psi

Cycle

N/A Refillable with Standard Grease Cartridge

Lube Choice

N/A Customer Fill/Refill

Operating Span

N/A Cartridge replaced as needed, Variable from 14 days to 2 years

Led Indicators

N/A Tri-color to indicate normal operation, low battery, low grease, low temp

Weatherproof

N/A Suitable for outdoor use

Dispensing Rate

N/A Standard timed intervals, or custom programming available

Approvals

N/A UL Division 2 Approval in Process

Features

N/A

  • Most powerful lubricator on the market; produces up to 900psi which enables it to service single-point applications up to 30' away (9m.) and multi-point applications up to 20' (6m.) away.
  • Available with long-life replaceable battery packs or optional external power sources. (AC and DC)
  • Single or Multi-point configuration.
  • Refillable using a standard grease cartridge (no other tools needed).
  • Able to service up to 12 lube points with optional progressive distribution block.
  • Unit is mounted on an easy to install base plate.
  • Optional remote control available to connect to customer supplied equipment or machinery. (eg: PLC, contactors, relays)
  • Suitable for both land-based or off-shore Nacelles.
  • Multiple settings from 15 days to 2 years.
  • Built on proven technology used worldwide since 1982. Market Leader
  • Designed for the toughest operating environments.

Typical Industries and Applications

N/A Mining / Minerals

    Stacker Cranes
    Crushers / Grinders / Shakers
    Bucket Elevators
    Conveyors
    Slurry Pumps
Manufacturing
    Bridge Cranes
    Conveyors
    Hoists
    Heat Treat Furnaces
    Chain Lubricators
    Robots
Food And Beverage
    Packaging Lines Mixers
    Washers, Dryers
    Can / Bottling Lines
    Ovens
Building Maintenance
    Elevators / Escalators
    Motors
    HVAC
    Air Handlers / Filters
Municipal
    Waste Water Treatment
    Potable Water Plants
    Incinerators
Metals
    Rolling Mills
    Material Handling
    Cooling Pumps
    Furnace Trunions and Fans
Pulp And Paper
    Lumber Mills
    Paper and Fiberboard Mfg.
    Slurry Pumps
    Dryers
Agriculture
    Flour Mills
    Grain Mills
    Feed Mills
Energy
    Coal Handling Equipment
    Drills, Pumps
    Refinery Operations
    Power Plants
    Pump Jacks

  • 1 Low Temp lubricants must be used at low temperatures
  • 2 Can be remote mounted up to 30 ft
Copyright © 2017 Airmatic Inc.,  All Rights Reserved