Angle clamps are used to clamp the MARTIN® APRON SEAL™ to the chute wall; approximately 9 in. (229 mm) of head space is required for proper mounting. Angle clamps are 6 ft (1829 mm) long with mount studs on 12-inch (305 mm) centers. Mounting height for studs will vary with troughing angle and type of MARTIN® APRON SEAL™ used. Consult Martin Engineering for mounting details.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

N/A Standard Angle Clamp Weldment
N/A Standard Angle Clamp Weldment with hardware including 1/2-13 studs, nuts & washers
N/A Low-Profile Angle Clamp Weldment
N/A Low-Profile Angle Clamp Weldment with hardware including 1/2-13 studs, nuts & washers
N/A Heavy-Duty Angle Clamp Weldment
N/A Heavy-Duty Angle Clamp Weldment with hardware including 5/8-11 studs, nuts & washers
N/A MARTIN® APRON SEAL™ Clamp Quick Release fits standard & low-profile angle clamps
N/A MARTIN® APRON SEAL™ Splice Kits Rubber
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Copyright © 2017 Airmatic Inc.,  All Rights Reserved