MARTIN® Self Adjusting Skirting provides an effective skirtboard seal that eliminates spillage and prevents the problems caused by fugitive material. It self-adjusts to eliminate skirtboard maintenance.

Because it requires only 1.25" of free belt space outside the chute, MARTIN® Self Adjusting Skirting is the ideal sealing system for conveyors with chutes close to the belt edge. The rubber and clamp assembly can be installed in spaces as low as 6" above the belt.

FEATURES
  • Maintains Seal Without Maintenance
    System rides on belt, self-adjusting to maintain effective seal automatically as belt path fluctuates and sealing strip wears.

  • Lowest Belt Edge Requirement
    Fits on any belt — provides effective seal on conveyors where chute width leave as little as 1.25" of free belt area for sealing.

  • Compact System Fits Tight Places
    Low-profile skirting assembly needs only 6" of clearance, allowing installation in small places.

  • Quick and Easy-To-Install
    Short 48" clamp sections with built-in plug-weld guides simplify installation.

  • Long-Lasting Performance
    Durable sealing strip provides 2" wear life. Zinc-plated moving parts will not seize or rust together.

  • "No-Tool" Rubber Replacement
    Held in place with linchpins, replacement of the worn sealing strip is a quick, easy, no-tool operation.

  • No Leaky Joints
    No spillage at joints in sealing strip — rubber strip supplied in continuous lengths up to 100'.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Seal Strip - Material

Length

Length (Maximum of)

37911 N/A MARTIN® Self Adjusting Skirting Assembly N/A EPDM Rubber N/A 48 in N/A 100 ft30.48 m
37911-R N/A MARTIN® Self Adjusting Skirting Rubber Strip N/A EPDM Rubber N/A 48 in N/A 100 ft30.48 m
37911-C N/A MARTIN® Self Adjusting Skirting Owner Operator Manual Installation Kit N/A EPDM Rubber N/A 48 in N/A 100 ft30.48 m
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 
Copyright © 2017 Airmatic Inc.,  All Rights Reserved