The classic ELECTRO-LUBER™ was developed in 1982. The ELECTRO-LUBER™ uses an electro-chemical reactor cell which converts electrical energy into safe, inert nitrogen gas. The gas is trapped in a hermetically sealed bellow type gas chamber. ATS ELECTRO-LUBE was the first company to use this self-contained automatic lubrication technology; as the gas is produced, an internal pressure builds up in the bellos and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty between 15 days and 1 year depending on the setting of the simple user-programmable DIP switch. The selection can be changed or turned off at any time.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Height

Diameter

Capacity

Temperature Range

J475 N/A 4 3/4 in N/A 6 3/4 in N/A 16 fl oz N/A -40° to 132° ºF
B250 N/A 4 in N/A 6 1/8 in N/A 8 fl oz N/A -40° to 132° ºF
M125 N/A 3 1/8 in N/A 5 5/8 in N/A 4 fl oz N/A -40° to 132° ºF
M60 N/A 3 1/8 in N/A 4 7/8 in N/A 2 fl oz N/A -40° to 132° ºF
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 
Copyright © 2017 Airmatic Inc.,  All Rights Reserved