VIBROLATOR® CD Series Pneumatic Ball Vibrators offer two-bolt, dual-mount bracket. Mounting may be parallel or at right angle to the surface. One unit serves several applications. Equal in power to other size 35 vibrators, it handles many of the big jobs.

Regulators provide full-range control of your VIBROLATOR® Vibrators.

Dual bracket applies force parallel or at right angles to mounting surface.
Unit of Measure



N/A CD-35


N/A 0.24

Frequency at 20 psi (1.38 bar)

N/A 6800 vpm

Force at 20 psi (1.38 bar)

N/A 315 lb143 kg

Flow at 20 psi (1.38 bar)

N/A 6 cfm170 L/min

Frequency at 40 psi (2.76 bar)

N/A 8800 vpm

Force at 40 psi (2.76 bar)

N/A 530 lb240 kg

Flow at 40 psi (2.76 bar)

N/A 12 cfm340 L/min

Frequency at 60 psi (4.14 bar)

N/A 10000 vpm

Force at 60 psi (4.14 bar)

N/A 675 lb306 kg

Flow at 60 psi (4.14 bar)

N/A 17 cfm481 L/min

Test Data

Frequency1 N/A 7700 vpm


N/A 82 dB


Max. Weight of Material in Slope of Bin2 N/A 6750 lb3062 kg


N/A 5.375 in137 mm


N/A 4.25 in108 mm


N/A 2.41 in61 mm


N/A 2.25 in57 mm


N/A 1.125 in29 mm


N/A 4 in102 mm


N/A 0.4375 in11 mm

Bolt Size - H

N/A 0.5 in13 mm


N/A 1.91 in49 mm

Pipe Tap Size - K

N/A 0.25 in6 mm


N/A 3.625 in92 mm


N/A 2.5 in64 mm


N/A 1.125 in29 mm


N/A Built for Tough Conditions
Simple, strong, durable design provides effective performance under challenging industrial conditions.

Minimal Maintenance
One moving part - a chrome steel ball rolling in hardened steel races - eliminates service requirements.

Models to Meet Needs
Range of models and sizes includes units for adverse conditions. Units operate at temperatures to 300°F (149°C); maintaining airflow of 5 - 10 psi (0.7 bar) allows use up to 350°F (177°C).

Mufflers offer Quiet Performance
Use mufflers to reduce noise levels and eliminate external contamination.

  • 1
    • Decibels measured with muffler connected to exhaust port and vibra tor securely mounted on test block.
    • Vibrations per minute (VPM) represents highest speed vibrator can attain and produce 85 db or less. (Note: Test is a comparison of vibrators. Levels will vary with each application.)
    • 2 Rule-of-thumb vibrator sizing: One pound of vibrator force for every ten pounds of product in the sloped section of the bin content. Mount vibrator as close as possible to material outlet. Reinforce mount area to prevent flexure of bin wall at mount location.
Copyright © 2017 Airmatic Inc.,  All Rights Reserved